37 thoughts on “Towing Our K-Swapped Jet Boat With The Hatch!”
KYYYYYYYYYYYYYYYYYYYYYYYYYYYYYLLLEEEEEEEEE
That thing is sick. The simplicity is what gets me. Very nice 🎉
Coming at ya from the future bro lol when ya gonna turbo the jet boat?
I love how you guys kept the zebra headliner
with an infinite supply of cool water get a water-cooled turbo followed by a water-cooled intercooler on this baby. like build a water cooling manifold and cool all the things, exhaust included.
Voltage is a pretty decent tasty dew
Love it.
The new time lapse music tho….not so much.
The hatch is like waggo…. it's not to crazy of a build but they are the OG cars always love seeing them
Ehh it's no worse than some of the other boats out on the water as far as being loud goes
I love this! It's so rad to see someone pulling a little jetboat with a Honda civic. Absolutely epic!
ive just recently starting watching yall and i can for sure say this is the most bad ass thing ive seen!
Don't forget rubber edge trim for the edge of the hatch door on the jet boat. It will help reduce vibration when turbo'd
Put a smoke bomb under the cover so you can see how well the fan pulls air out
Also on the basis of the exhaust, speak to taylor ray about who he got to wrap the c6 exhaust and you wont have to ever worry about the heat
So even tho youve done loads of improvements your still holding the front window closed with molegrips
LOL BRO THE NEW TIME LAPSE MUSIC HAS TO GO
You deff have me beat with awd and dog box but I’ve used my turbo eg sedan to take my boat to the lake. 😊
Bruh imagine if you guys start selling these jet boats
The hatch is a all in one vehicle
Not worried about your suspension wear from towing?
my hatch days memory
The purpose of the bilge fan is to evacuate flammable vapors before starting engine. Gasoline produces ignitable vapors that are 3 to 4 times heavier than air and can travel for great distances along low areas. Gas vapors tend to accumulate in low or enclosed spaces, especially in boats. These vapors can be ignited by an spark or arc from any electrical induced source. Solution to proper ventilation is to have fan drawing fresh outside air, ducted to the bottom of the boat to push out any contaminated/flammable vapors out the open vented side. It's also standard procedure to run the vent fan of enclosed engine boats at least 5 minutes prior to starting. Another easy solution to all the above is, open engine cover while getting ready and backing down ramp, start motor, then close cover. Bottom line is to have be safe, have fun and no boom💥
All the way from Australia here boys love ya content good to see ya boat stuff been watching you since the old house with the hatch good to see she still kicking I'm a massive Honda boy I actually wanna k swap a Holden Commodore yeah the fucking Boyz 🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺
You ended up with one of the nicest jetboats I’ve seen bro that thing is sweet
Imagine how much you could pull with a boosted k24 in the Cummins on some kinda automatic transmission it’d be super interesting to see
This is awesome but if the acceleration is pretty decent you might step up in pitch on your impeller because a full size engine like that's going to make better torque than a little tiny motor with the similar horsepower and then once you boost it you will definitely need more blade
You really need to take boater safety course you are so reckless. You're going to kill somebody! Plus none registered boat gets impounded
Ah yes a honda civic pulling a honda powered jet boat, very fitting xD
I’d say to put heat shield under the back seats on the boat
Look into some heat shielding for the underside of the back seats, should help a lot
HEY I'm in Ontario but I have a good frunt bumper and 2 good frunt fenders and 2 98 intagra frunt seats and the glove box and fuse panel for sale all were in my 1994 civic hatch
You guys need to install the trim on the wheel. Once you're able to trim her out she'll speed up a lot.
Awesome video. That boat looks like a blast. Can't wait to see it rip with some boost ,that's gonna be wild.
Paint the cage
Crazy seeing a sea plane who knows kswaped water plane next?
Shoulda used the Porsche, lol🤣
Need something to fall asleep to peacefully or even for studying check out this heavy thunderstorm white sound! 🧡🧡 • https://youtu.be/WZ95kVpnVes
KYYYYYYYYYYYYYYYYYYYYYYYYYYYYYLLLEEEEEEEEE
That thing is sick. The simplicity is what gets me. Very nice 🎉
Coming at ya from the future bro lol when ya gonna turbo the jet boat?
I love how you guys kept the zebra headliner
with an infinite supply of cool water get a water-cooled turbo followed by a water-cooled intercooler on this baby. like build a water cooling manifold and cool all the things, exhaust included.
Voltage is a pretty decent tasty dew
Love it.
The new time lapse music tho….not so much.
The hatch is like waggo…. it's not to crazy of a build but they are the OG cars always love seeing them
Ehh it's no worse than some of the other boats out on the water as far as being loud goes
I love this! It's so rad to see someone pulling a little jetboat with a Honda civic. Absolutely epic!
ive just recently starting watching yall and i can for sure say this is the most bad ass thing ive seen!
Don't forget rubber edge trim for the edge of the hatch door on the jet boat. It will help reduce vibration when turbo'd
Put a smoke bomb under the cover so you can see how well the fan pulls air out
Also on the basis of the exhaust, speak to taylor ray about who he got to wrap the c6 exhaust and you wont have to ever worry about the heat
So even tho youve done loads of improvements your still holding the front window closed with molegrips
LOL BRO THE NEW TIME LAPSE MUSIC HAS TO GO
You deff have me beat with awd and dog box but I’ve used my turbo eg sedan to take my boat to the lake. 😊
Bruh imagine if you guys start selling these jet boats
The hatch is a all in one vehicle
Not worried about your suspension wear from towing?
my hatch days memory
The purpose of the bilge fan is to evacuate flammable vapors before starting engine. Gasoline produces ignitable vapors that are 3 to 4 times heavier than air and can travel for great distances along low areas. Gas vapors tend to accumulate in low or enclosed spaces, especially in boats. These vapors can be ignited by an spark or arc from any electrical induced source. Solution to proper ventilation is to have fan drawing fresh outside air, ducted to the bottom of the boat to push out any contaminated/flammable vapors out the open vented side. It's also standard procedure to run the vent fan of enclosed engine boats at least 5 minutes prior to starting. Another easy solution to all the above is, open engine cover while getting ready and backing down ramp, start motor, then close cover. Bottom line is to have be safe, have fun and no boom💥
All the way from Australia here boys love ya content good to see ya boat stuff been watching you since the old house with the hatch good to see she still kicking I'm a massive Honda boy I actually wanna k swap a Holden Commodore yeah the fucking Boyz 🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺
You ended up with one of the nicest jetboats I’ve seen bro that thing is sweet
Imagine how much you could pull with a boosted k24 in the Cummins on some kinda automatic transmission it’d be super interesting to see
This is awesome but if the acceleration is pretty decent you might step up in pitch on your impeller because a full size engine like that's going to make better torque than a little tiny motor with the similar horsepower and then once you boost it you will definitely need more blade
You really need to take boater safety course you are so reckless. You're going to kill somebody! Plus none registered boat gets impounded
Ah yes a honda civic pulling a honda powered jet boat, very fitting xD
I’d say to put heat shield under the back seats on the boat
Look into some heat shielding for the underside of the back seats, should help a lot
HEY I'm in Ontario but I have a good frunt bumper and 2 good frunt fenders and 2 98 intagra frunt seats and the glove box and fuse panel for sale all were in my 1994 civic hatch
You guys need to install the trim on the wheel. Once you're able to trim her out she'll speed up a lot.
Awesome video. That boat looks like a blast. Can't wait to see it rip with some boost ,that's gonna be wild.
Paint the cage
Crazy seeing a sea plane who knows kswaped water plane next?
Shoulda used the Porsche, lol🤣
Need something to fall asleep to peacefully or even for studying check out this heavy thunderstorm white sound! 🧡🧡
•
https://youtu.be/WZ95kVpnVes