F150 Raptor Front End Conversion Is Complete! Gen1 ➡ Gen2

40 thoughts on “F150 Raptor Front End Conversion Is Complete! Gen1 ➡ Gen2”

1. very good job, you have the link where to buy the complete kit that you show in video to change the face of the raptor 2014 .
   on ebay or something please…..

2. Does the 3rd gen front end fits the 1st generation?

3. Does anyone know if they still have this raptor ?

4. You did all that body work and paint and you just left fender looking jank as hell where it meets the door…

5. Hello. Great video again. hey, what size of compressor and which spray guns do you use? I would like to try to paint my car but I don't have big equipment. Thank you…

6. What size are the fenders and from where? Fiberwerx.

7. So badass

8. Nice "Soapy Wooder" reference! lol

9. Fender meeting the door didn't transition well, but its V8 raptor problem solved

10. I will do this front end conversion when I find another cheap gen 1.

11. Man I want to convert my front end

12. Why would you put ugly GEN2 parts on the Classic GEN1?

13. Why aren’t the 3 grill lights on?

14. Pls keep the blue

15. I dig everything but the front bumper it doesn't go with the flow.

16. Did truck are ready have led headlights or do you need to run ballast or anything like that to run light

17. I saw you cheat that gap on driver door/fender. It's looks like crap from the angle you got – huge gap where you cut away, and doesn't look like you did what you said you would. Great build though. That gray was awesome, your mom was spot on. But, a Raptor is a Raptor. peace

18. The final product looks awesome!

19. Hey guys I've been painting since 04' You need a Sealed Motor or Explosion-proof Exhaust Fan CFM at 10,000 Cuz, you may or may not know that the Clear Harder you use has Isocyanates… VERY BAD for YOU… You don't wanna expose yourself to it AT ALL…That Cloud You had going on in your Spray Both is Bad you should Never Have That…Get On It…

20. Make the kit for people that want to do the same. Id love to convert mine

21. so much dust on the finished hood….so sad(

22. No jack stands……😔

23. Would love to do this conversion on my 2014 supercharged Raptor 😬🤓. Y’all should sell this as a service. I’d buy!

24. 21:11 “boat, boat” lol

25. Did you consider adhesion promoter?

26. H is for hack.

27. 18:04 Perfect example of why a person has to be smarter than their vehicle. NEVER use auto lights, use the light switch.

28. Posted their videos and am nkmot getting views and subscribers hope y'all subscribe to the channel

29. What a nice result, congrats B

30. Any good painter will tell you, any method you use was invented by trial an error.

31. Do a body lift kill the rubbin

32. How about a mid engine mustang build?

33. Get it wrapped if you are set on the grey. Personally I love the blue.

34. @20:15 forgot to fix the fender door gap

35. G is for Ghetto-Repairs 😂 still love the channel.

36. I'm a little late but the light beam was high because those are the high beams. The top ones are the low beams.

37. Before you compound the bonnet (hood!) you need to sand the dust nibs with something like 2000 grit wet n dry paper. Plenty of warm soapy water, knock the nibs off, then a quick sand all over, then buff, and the results will be awesome.

38. Just wrap it!!!!

39. Well if you can't paint the whole truck just wrap it that nardo grey

40. Those are the high beams are they not?

Comments are closed.